The Workhorse 1000 ride on floor scraper is a very versatile floor tile scraper. Small enough to go through a 29″ doorway and short enough to go into a small elevator with a overall length of only 49″.
The net weight of the floor tile scraper is only 1,100 lbs with all the weights removed. Light enough to not overload most small elevators. This compact size and light weight also make this scraper a great choice to remove those roofing products like felt paper, foam, and rock. Unlike the competition this floor scraper has a large 8″ diameter front caster wheel and 5″ of ground clearance to allow maneuvering in rough areas.
With stringent EPA regulations the current propane certified engine is a Subaru EH72 air cooled with 24 hp. Maximum weight of the floor tile scraper loaded with optional weights is 2,800 lbs. The standard weight of 2,100 lbs. is usually sufficient for most floor scraping jobs. Ceramic tile removal is usually the most demanding removal and more weight the better to keep the ceramic removal tool sliding on the concrete under the ceramic tile. With forward speeds near 6 mph this machine can move quickly across a large job site.
Our Workhorse Ride on Floor Scraper Downloads:
WORKHORSE 1000 ride on floor scraper specifications:
|Empty Weight:||1,100 lbs||
|Gross Weight:||2,800 lbs|
|Fuel Capacity||20 lb tank|
|Hydraulic Capacity||5 gal|
|Travel Speed||6 MPH|
|Maximum RPM||3600 RPM|
|Cooling Medium||Air Cooled|
|No. of Cylinders||2|